simulasi koneksi jaringan router pada packet tracer

Sekarang mari kita belajar bersama Membuat Simulasi Jaringan Router EIGRP dengan Cisco Packet Tracer,Pada Praktek kali ini kita menggunakan 2 Router dan juga 2 PC
Langsung Saja Buka Cisco Packet Tracer ,dan Temen temen buat Simulasi Jaringan seperti gambar di bawah ini.

 

Setelah Itu Setting IP Address Pada kedua PC tersebut

PC A IP Address 192.168.2.2 Subnet Mask 255.255.255.0 Default Gateway 192.168.2.1

PC B IP Address 172.10.10.2 Subnet Mask 255.255.0.0 Default Gateway 172.10.10.1

Setting IP PC A

Setting IP PC B

Ok Setelah itu kita seting router 1

Klik Router 1 dan Setlah itu masuk pada Menu CLI

Continue with configuration dialog? [yes/no]: no

Press RETURN to get started! ketik enter

Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface fa 0/0
Router(config-if)#ip address 192.168.2.1 255.255.255.0
Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)# exit

Router(config)#interface fa 0/1
Router(config-if)#ip address 192.168.0.1 255.255.255.252

Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
Router(config-if)#exit
Router(config)#exit
%SYS-5-CONFIG_I: Configured from console by console
Router#write
Building configuration…
[OK]

Setelah selesai setting Router 1 Sekarang Lanjut Setting Router 2

Klik Router 2 dan Setlah itu masuk pada Menu CLI

Continue with configuration dialog? [yes/no]: no
Press RETURN to get started!

Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface fa 0/0
Router(config-if)#ip address 192.168.0.2 255.255.255.252
Router(config-if)#no shutdown
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#interface fa 0/1
Router(config-if)#ip address 172.10.10.1 255.255.0.0
Router(config-if)#no shutdown
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
Router(config-if)#exit
Router(config)#exit
%SYS-5-CONFIG_I: Configured from console by console
Router#write
Building configuration…
[OK]

Setting EIGRP Pada Router

Pada Router 1

Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#router eigrp 10
Router(config-router)#network 192.168.2.0
Router(config-router)#network 192.168.0.0
Router(config-router)#exit
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#write
Building configuration…
[OK]

Setting Router EIGRP 
Pada Router 2

Router#enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#router eigrp 10
Router(config-router)#network 192.168.0.0
Router(config-router)#network 172.10.0.0
Router(config-router)#exit
Router(config)#exit
%SYS-5-CONFIG_I: Configured from console by console
Router#write
Building configuration…
[OK]

Proses Setting Router Telah Selesai Sekarang Coba ping dari PC A KE PC B

Apabila Berhasil Maka Ada Jawaban Reply

demikian tulisan saya
semoga bermanfaat
:)